We designed Our Exclusive Shorty Clutch kits to produce a much quicker take off, better short hill climbing and less stress on your rear bearings, brain and your wallet!!
This is the Clutch Kit everyone is talking about and its much less than any other "top tier" clutch on the market! Amazing increases posted by our members on Buggynews, MBRA, NEBA, Buggynuts and other sites!

COMPARE Top Clutch kits!....

Shorty Clutch Kit= Super simple to set up, super "torquey" and much less expensive than other top brands! Especially when you consider that it comes with a Chrome over Steel Performance bell housing too!

The DRPulley clutch has 6 sets of springs (3 arm and 3 pillow) to mess with. Great clutch but Good luck setting THAT up right for your needs! and it is very expensive ($250 to $300 then add a $60 bell housing, you'll be well over $300 smackeroos!!)

The Malossi is another great clutch that has these cool weights you screw into one of several positions into each arm as well as springs you need to adjust But, do you really want to spend weeks or more dialing THAT one in!! ($250 to $300 then add a $60 bell housing and you'll still be well over $300!)

Shorty Clutch Kit = 2LBS lighter than your stock clutch setup!!
Our KNM exclusive, innovative design will add to your low end torque and your friends envy! Spools up faster giving you a much better take off and hill climbing ability and will add about 2mph to your 0-25mph up hill speed to about any buggy or even more on an ATV or Scooter and get you there 2 seconds faster! AND, the Shorty with a performance bell housing is half what the others cost!!! Not only do you get a much quicker clutch kit with the bell but you'll save close to $150 too!!

Plus, Check out our UNIQUE "Do it Yourself" WEBSITE LINK up top for more detailed info on this amazing Clutch Kit and we'll even show you how to install it! We don't know what more we can do to make this a better deal!
Wait, YES WE DO!! Our 150 Shorty kit is RE-BUILDABLE TOO!!!!
Now you can get a new set of arms, Pads and springs for a fraction of the cost of a whole new clutch with our 150cc Shorty Re-build Kit!

It's always best to test any new setup before running it hard or going on a long run and if you have any questions, call us. We'll help you get the most out of your shorty kit!

NOTE: In most cases, you will need to adjust your roller weights in your variator and/or springs when you install the shorty. Due to the large amount of torque our shorty Clutch gets you, you'll already be near the top torque you can get out of your machine so now you can work on your top speed!

*This Shorty will not work on the Yerfdog 3203

SHORTY CLUTCH DEMO...